apem www.apem.com d-41 fm series snap-in rocker switches - panel cut-out 19 x 13 (.750 x .508) distinctive features and specifications d agency approvals a vailability : functions 1 and 6 marking : approved models are standard marked. packaging unit : 150 pieces. dimensions : first dimensions are in mm while inches are shown as bracketted numbers. ? illuminated and non-illuminated ? for class ii appliances ? vde and ul approved ? protection against moisture by double-shell case when the switch is submitted to moisture (drops, condensation), the double-shell case conducts the liquid outside, thus protecting the contact area and terminals. the light dripping inside the equipment resulting from this should be evacuated by adequate arrangement on back of panel . ? protection by boot in case of sand or splashing water, the best protection consists of insulating the rocker from these aggressive elements. this can be achieved with transparent pvc boot u5720 . order separately, see section h. en 61058-1
d-42 apem www.apem.com fm series snap-in rocker switches - panel cut-out 19 x 13 (.750 x .508) single pole - non-illuminated d ?mechanical life : 30 000 cycles ?operating temperature : -20? to +85? ?case, frame, rocker : pa6/6 ?contacts : silver ?terminals : silver plated ?panel cut-out : ?approved ratings ( functions 1 and 6 ) : vde : 10(4)a 250vac t85? - ul : 6a 250vac & 125vac t65? ?max. contact rating : - functions 1 and 6 : see above. - function 3 : 4a 250vac - functions 8 and 9 : 6a 250vac ?initial contact resistance : 20m ? max. ?insulation resistance : 1.000 m ? min. at 500vdc ?dielectric strength : - functions 1 and 6 : 2.500 vrms between terminals - functions 3, 8 and 9 : 1.500 vrms between terminals ? electrical life at full load : 10 000 cycles panel thickness 0,75 to 1,25 mm 1,25 to 2 mm 2 to 3 mm dim. y 19,2 +0/-0,1 19,4 +0/-0,1 19,8 +0/-0,1 dim. z 12,9 +0,15/-0 12,9 +0,15/-0 12,9 +0,15/-0 fm c a 0 0 series contacts a silver lamp 0 none electrical functions 1 on - off 3 mom - off 6 on - on 8 on off mom 9 on off on rocker c non illum. concave te r minals 2 solder lug 8 quick-conn. 9 straight pc (funct. 1 & 6) frame colour 2 black others : on request. rocker colours 1 blue 2 black (std) 3 green 4 grey 5 y ellow 6 red (std) 7 ivory 7/1 white 9 orange lens colour 0 no lens marking * 000 none 001 002 003 004 005 0 0 i i 0 ii o ff o n 0 i single throw and double throw switch 1-2 2-3 fmc1 on - off fmc3 mom - off fmc6 on - on fmc8 on off mom fmc9 on off on shown with quick-connect terminals 12.80 9.30 21.00 1.50 18.80 7.00 7.00 0.80 12.50 8.00 4.80 15.00 321 (.275) (.031) (.189) (.492) (.827) (.591) z y (.740) (.275) (.504) (.315) (.059) (.366) 9 terminals 2 (.11x.031) (.204) (.122) (.051) 1.30 2.80x0.80 3.10 5.20 solder lug 8 (.185x.031) (.275) 4.70x0.80 7.00 quick-connect straight pc (functions 1 and 6 only) 13.00 (.512) (.047 x .031) 1.20 x 0.80 * colour of marking : white for black rockers - black for other colours - other : on request.
apem www.apem.com d-43 fm series snap-in rocker switches - panel cut-out 19 x 13 (.750 x .508) single pole - illuminated d ?case, frame and rocker : pa6/6 ?lens : pc ?contacts : silver ?terminals : silver plated ?lamp terminal : no plating ?fluorescent lamp for blue or green lens, neon lamp for other colours ?panel cut-out : ?approved ratings : vde : 10(4)a 250vac t85? - ul : 6a 250vac & 125vac t65? ?led types available : 2v (3v max.) 10ma led (resistor to be series connected by the user) 5v or 12v led with integrated resistor ?initial contact resistance : 20m ? max. ?insulation resistance : 1.000 m ? min. at 500vdc ?dielectric strength : 2.500 vrms between terminals ?electrical life at full load : 10 000 cycles ?mechanical life : 30 000 cycles ?operating temperature: - 20? to + 85? panel thickness 0,75 to 1,25 mm 1,25 to 2 mm 2 to 3 mm dim. y 19,2 +0/-0,1 19,4 +0/-0,1 19,8 +0/-0,1 dim. z 12,9 +0,15/-0 12,9 +0,15/-0 12,9 +0,15/-0 fm l 1 8 a series contacts a silver lamp a 220v neon b 220v fluor. c 110v neon d 110v fluor. led 2v 10ma e blue f red/green g green h y ellow j white k red l orange no resistor** led 5v n green p y ellow q red led 12v t green u y ellow v red electr. function 1 on - off rocker l illumin. concave te r minals 8 quick-connect frame colour 2 black others : on request. rocker colour 1 blue 2 black (std) 3 green 4 grey 5 y ellow 6 red (std) 7 ivory 7/1 white 9 orange lens colour 1 blue * 3 green * 5 y ellow 6 red 8 t ranslucent 9 orange * w. fluorescent lamp marking * 000 none 001 0 * colour of marking : white for black rockers - black for other colours - other : on request. ** resistor value = supply voltage - led for war d voltage led forward current autres options : voir guide de codification sur page ci- illuminated switches - quick-connect terminals fml1 on - off 15.00 12.50 21.00 4.80 9.30 1.50 0.80 7.00 12.80 7.00 18.80 8.00 3 2 1 1 32 (.591) z (.827) (.740) (.275) (.275) (.031) (.189) (.059) y (.504) (.492) (.315) (.366)
|
